Dream Vision DreamScaler4, Руководство пользователя

Страница: 17 / 40

4.0 MENU OPTIONS
R699761 - DreamScaler 4 User Manual 17
• YPbPr
• YCbCr 4:2:2 color space
• YCbCr 4:4:4 color space
• Auto
Input Level
The input level setting allows the user to specify the levels of the input signal, either Video (16-235) or PC (0-255)
• Video
• PC
VCR Mode
VCR Mode decouples the output timing completely from the input timing to ensure a stable output from the
DreamScaler 4 for VCR playback especially during trick-play modes (play forward, play reverse, still/pause).
• On – Output timing is decoupled from the input timing regardless of Frame Rate settings.
• Off – Output timing is dependent on Frame Rate settings.
• Auto - Turns on VCR Mode if a VCR source is detected.
HDMI Config
HDCP mode
• Off: HDCP is disabled at the DreamScaler 4’s HDMI input. some sources turn off HDCP in this case and the
DreamScaler 4 drives a non-HDCP DVI display or an analog display.
• On: The DreamScaler 4 continuously looks for a HDCP source on its HDMI input.
Auto Aspect Ratio
• Off: The Aspect Ratio is determined by user.
• On: The DreamScaler 4 reads the video aspect ratio contained into the Info Frame and applies it if available.
Auto Colour Space
• Off: The Color space is determined by user.
• On: The DreamScaler 4 applies the Color Space specified into the Info Frame if available.
Auto Input Priority Selection
The Auto Input Priority Selection function assigns different priorities to the video input’s automatic active video
selection mode (AUTO in Input Select menu). First select the video input, then change the priority of that input.
1) Press the Down button. The first video input Video 1 is shown.
2) Press the Enter button to view the current priority of the selected input.
3) Press the Up or Down button to change the priority of the selected input.
4) Press the Exit button again to complete the priority assignment.
5) Repeat Steps 1 through 4 to select the next video input and adjust the priority setting.
Audio Input
The Audio Input function assigns an audio input to the currently selected video input. Four digital audio inputs and a
single analog audio input are available.
To assign the audio input to another video input, push the Down button. The front panel display (FPD) shows the
current setting. For more info about how to assign an audio input to a video input, refer to Audio Input Operation.