Draytek VigorAP 906 Скачать руководство пользователя страница 97

Страница: 97 / 171

III-1-1 System Status

The

System Status

provides basic network settings of the Vigor modem. It includes LAN and WAN

interface information. Also, you could get the current running firmware version or firmware-related
information from this presentation.

Each item is explained as follows:

Item Description

Model /Device Name

Display the model name of the modem.

Firmware Version

Display the firmware version of the modem.

Build Date/Time

Display the date and time of the current firmware build.

System Uptime

Display the period that such device connects to the Internet.

Operation Mode

Display the operation mode that the device used.

System

Memory total

Display the total memory of your system.

Memory left

Display the remaining memory of your system.

LAN

MAC Address

Display the MAC address of the LAN Interface.

IP Address

Display the IP address of the LAN interface.

IP Mask

Display the subnet mask address of the LAN interface.

Wireless LAN (2.4GHz/5GHz)

MAC Address

Display the MAC address of the WAN Interface.

SSID

Display the SSID of the device.

Channel

Display the channel that the station used for connecting with such a
device.

Содержание VigorAP 906












































































































































































Результаты поиска

Содержание VigorAP 906

Отзывы:

Draytek VigorAP 906, Руководство пользователя, Страница: 97 / 171

Результаты поиска

Содержание VigorAP 906

Отзывы: