manualshive.com logo in svg

Draytek VigorAP 906, Руководство пользователя, Страница: 80 / 171

Поделиться
Скачать
Draytek VigorAP 906 Скачать руководство пользователя страница 80

 

 

72 

II-4-4 Basic Configuration Sync 

If you add one Mesh Node in a mesh group, the Mesh Root will send the basic configuration to the 
device. This page could help you to change the Mesh Root settings and deliver the new 
configuration of the Mesh Root to all "connected" Mesh Nodes. 

 

Available settings are explained as follows: 

Item Description 

System Maintenance /   
Wireless LAN (2.4Hz) / 
Wireless LAN (5GHz) 

Check the item(s) you want to make configuration sync. 

Apply

 – Click it to apply the settings configured by such AP to all 

connected mesh nodes. 

Note that this button is available only 

when such AP is in mesh root mode.

 

Tips for Mesh Network Setup 

 

Set up TWO mesh devices with uplink RSSI larger than -65dBm. 

 

Upgrade the firmware version of Mesh devices through the Mesh link, starting from the mesh 
device with less hop number. For example, upgrade the firmware from the root, hop1 Mesh 
Node then hop2 Mesh Node, and so on.   

 

VigorMesh network supports up to 3 hops of mesh devices. However, it is suggested to connect 
the mesh group with less than or equals to 2 hops. 

For your reference, we make a real mesh environment test and get the following record. (Use 
VigorAP APP to do an internet speed test with different hop mesh nodes.) 

Internet Download Speed (for root and hop1 ~ hop3):   

iPad connects to Root              : 80Mbps 

iPad connects to hop1 Node   : 49Mbps (Uplink RSSI : -55dBm) 

iPad connects to hop2 Node   : 41Mbps (Uplink RSSI : hop2 -64dBm / hop1 -55dBm) 

Содержание VigorAP 906












































































































































































Отзывы:

Нет отзывов