manualshive.com logo in svg

Draytek VigorAP 906, Руководство пользователя, Страница: 78 / 171

Поделиться
Скачать
Draytek VigorAP 906 Скачать руководство пользователя страница 78

 

 

70 

II-4-2 Mesh Status 

This page shows that one Mesh Group can contain up to 8 devices. A device with hop 0 indicates 
that it is one special Ethernet Backhaul. It means this node will use an Ethernet cable to join the 
mesh group while others use the wireless link. 

 

Item Description 

Local Status 

Display general information for such VigorAP.

 

Devices 

Display detailed information for this VigorAP (as mesh root) and mesh 
node(s) in the group.   

Index

 – Display the number of the device within a mesh group. 

Status

 – Display the role of the device within a mesh group. 

Device Name

 – Display the name of the device (for identification). 

IP Address

 – Display the IP address of the device. 

MAC Address

 – Display the MAC address of the device. 

Hop

 – Display the level of the devices within a mesh group. “0” means 

the access point is connected to a device by using an Ethernet cable 
(wired). “1” to “3” means the level of the access point within a mesh 
group and it connects to other access points via a wireless link. 

Uplink

 – Display the MAC address of the device that the AP connects 

to.

 

Total number of 
Clients 

Display the station list of all mesh devices. 

Содержание VigorAP 906












































































































































































Отзывы:

Нет отзывов