Draytek Vigor300B Скачать руководство пользователя страница 164

Страница: 164 / 224

Vigor300B Series User’s Guide

156

Service Type

Select a service type (Dynamic, Custom or Static). If you
choose Custom, you can modify the domain that is chosen in
the Domain Name field.

Domain Name

Type in one domain name that you applied previously. Use
the drop down list to choose the desired domain.

User Login Name

Type in the login name that you set for applying domain.

Password

Type in the password that you set for applying domain.

Wildcard and
Backup MX

The Wildcard and Backup MX features are not supported for
all Dynamic DNS providers. You could get more detailed
information from their websites.

Mail Extender

Type the IP/Domain name of the mail server.

Apply

Click it to save the configuration.

Cancel

Click it to exit the dialog without saving the configuration.

Enter all the settings and click

Apply

The DDNS Profile has been modified.

Содержание Vigor300B

































































































































































































































Результаты поиска

Содержание Vigor300B

Отзывы:

Draytek Vigor300B, Руководство пользователя, Страница: 164 / 224

Результаты поиска

Содержание Vigor300B

Отзывы: