background image

11

DrayTek provides firmware/router tool CD with Vigor2600Ge.

Please insert CD to your computer in order to run Quick Start Wizard which is an user-

friendly application for setting up Internet access.

The Quick Start Wizard is now available for Windows operating system.

Procedure:

You shall connect your router to your PC as insert CD to your PC.

After auto-run screen pops out after inserting CD,please click 

Run Quick Start

Wizard

Quick Start Wizard will pop out with listed found routers if your network already have

more then one Vigor routers.

Onec you see following user name/password screen, the default value is null. Press OK

to continue.

The menu of Quick Start Wizard will be provided of your selection of ISP name(if

already existed inside QSW) that contains default DSL parameters which are

Encapsulation protocol, VPI, VCI, Modulation. If your ISP is not listed, you can still

enter the DSL parameters provided by ISP.

Click the 

Apply

 

button to save the settings

to the router and then surf Internet!

Connecting the Router to the Internet via

                  Quick Start Wizard

Connect your router

Authentication of your

ID

Set DSL parameters

Detect the router

Содержание Vigor2600Ge






























Отзывы: