Vigor2820 Series User’s Guide
113
Enable this account
Check the box to enable this function.
Idle Timeout-
If the dial-in user is idle over the limitation of
the timer, the router will drop this connection. By default, the
Idle Timeout is set to 300 seconds.
ISDN
Allow the remote ISDN dial-in connection. You can further
set up Callback function below. You should set the User
Name and Password of remote dial-in user below. This feature
is for
i
model only.
PPTP
Allow the remote dial-in user to make a PPTP VPN
connection through the Internet. You should set the User
Name and Password of remote dial-in user below
IPSec Tunnel
Allow the remote dial-in user to make an IPSec VPN
connection through Internet.
L2TP
Allow the remote dial-in user to make a L2TP VPN
connection through the Internet. You can select to use L2TP
alone or with IPSec. Select from below:
None -
Do not apply the IPSec policy. Accordingly, the VPN
connection employed the L2TP without IPSec policy can be
viewed as one pure L2TP connection.
Nice to Have -
Apply the IPSec policy first, if it is applicable
during negotiation. Otherwise, the dial-in VPN connection
becomes one pure L2TP connection.
Must -
Specify the IPSec policy to be definitely applied on the
L2TP connection.
Specify Remote Node
Check the checkbox-
You can specify the IP address of the
remote dial-in user, ISDN number or peer ID (used in IKE
aggressive mode).
Uncheck the checkbox-
This means the connection type you
