Vigor2820 Series User’s Guide
39
Domain Name
– Type in the domain name that you have assigned.
Specify an IP address
– Click this radio button to specify some
data.
WAN IP Alias
- If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use WAN
IP Alias. You can set up to 8 public IP addresses other than the
current one you are using. Notice that this setting is available for
WAN1 only. Type the additional WAN IP address and check the
Enable box. Then click OK to exit the dialog.
IP Address
– Type in the private IP address.
Subnet Mask
– Type in the subnet mask.
Gateway IP Address
– Type in gateway IP address.
Default MAC Address
Type in MAC address for the router. You
can use
Default MAC Address
or specify another MAC address
for your necessity.
MAC Address
– Type in the MAC address for the router
manually.
DNS Server IP
Address
Type in the primary IP address for the router. If necessary, type in
secondary IP address for necessity in the future.
After finishing all the settings here, please click
OK
to activate them.
P
P
P
P
P
P
o
o
E
E
f
f
o
o
r
r
W
W
A
A
N
N
2
2
To use
PPPoE
as the accessing protocol of the Internet, select
PPPoE
mode. The following
web page will appear.
