- 8 -
with the “alkali liquid barrel”.
(7). Connect one end of the “boric acid pipe” with the “boric acid inlet” of the host machine and another with
the “boric acid barrel”.
VI. Application Methods and Steps
Pour the reagent which is prepared based on “VII” in page 9 into the container.
6.1. Plug the power plug into the socket.
The display on the liquid crystal display after startup is shown in the Figure 6-1.
Function selection
6.2. Press “▼” key to enter the “function selection” page: See Figure 6-2.
Figure 6.2 Function selection
F1:Correction-Flow correction F2:Manual-Manual distillation
F3:Automatic-Automatic distillation F4:Program-Program setting
6.3. Flow Calibration
Prior to flow calibration, connect with the container; after that, press “F6”, “F7”,“F8” keys for several times
to fill the pipeline with liquid.
In the “function selection” page, press “F1” key to enter the “flow calibration” page: See Figure 6-3.
Figure
6.1
Schematic
Diagram of the Switch
