Draper CSP2625, Инструкция по эксплуатации, Страница: 28 / 36

10.4 FUEL FILTER
The fuel filter should be replaced annually.
– To change the fuel filter, unscrew and remove the fuel tank cap. Using a pair of long nose
pliers, pull the filter from the fuel tank. Carefully remove the metal filter clip and refit to
new filter.
Use only a genuine replacement filter.
10.5 OIL FILTER
– The oil filter should be replaced annually.
– To change the oil filter, unscrew and remove the oil tank cap. Using a pair of long nose
pliers, gently pull the filter from the oil tank. Carefully remove the filter from the line and
refit new filter.
Use only a genuine replacement filter.
10.3 AIR FILTER (FIGS.37 – 39)
– A clogged air filter reduces the engine
efficiency, consequently reducing cutting
effectiveness while increasing fuel consumption.
Note: The air filter should be cleaned more
frequently when the wood being cut is dry or
the work environment dusty.
– Turn and loosen the air filter screw and
remove the air filter cover .
– Remove the air filter element from the
machine. Blow any loose dirt from inside,
outwards. If dirt is hard to remove, wash using
hot soapy water. Ensure filter is fully dry before
refitting.
– Replace the filter if damaged (deformed or
cracked).
28
10 MAINTENANCE
FIG.38
FIG.39
FIG.37