Draper CSP2625, Инструкция по эксплуатации, Страница: 21 / 36

– Safety boots with a good non-slip tread incorporating protection to toes & shins.
High visibility jacket. Some jackets incorporate the clogging material like the trousers, but
in any event should be close fitting.
– All this equipment should be tested to relevant international and European standards and
marked accordingly. The gloves, boots and trousers should be additionally marked with
symbol, also indicating the chain speed to which
they have been tested.
Attention: Fully read and understand the general
safety instructions section of this manual before
proceeding.
9.5 HOLDING THE CHAIN SAW
(FIGS.22 – 23)
Do not be afraid to hold the chain saw power head
close in to the body. In this position the weight of
the saw will be easy to bear and in the event of a
kickback will be more controllable. Firmly grip the
rear handle pulling it tight in to hip/thigh. With the
left hand grip the front handle with thumb on the
underside. In this position with the body turned
slightly towards the saw, should a kickback occur
the left arm will be stronger to brace against the
force of the kickback, or if unable to withstand, the
saw chain should avoid the face/head.
Try to work at hip height, or bend the knees instead
of the back. This will be more comfortable and a
safer stance to adopt.
21
9 OPERATION & USE
FIG.22
Photo for illustrative purposes only.
Photo for illustrative purposes only.
FIG.23