Overview -
Components
(Aerolift 100 shown)
CAUTION
Read and understand all warnings
(Page 2 of this document)
before beginning installation.
Contents
Overview -
Components, Planning .....................................................................1
Section 1 -
Hanging Unit ......................................................................................2
PLEASE READ -
Safety Information ....................................................................2
Section 2 -
Environmental Air Space Housing for AeroLift 100 .....................3
Section 3 -
Environmental Air Space Housing for AeroLift 150 .....................4
Section 4 -
Installing Projector ...........................................................................5
Section 5 -
Operation............................................................................................5
Section 6 -
Testing Safety Limit Switches .........................................................5
Section 7 -
Electrical Connections .....................................................................6
Section 8 -
Wiring Diagrams ................................................................................6
Section 9 -
Adjustments .......................................................................................7
Section 10 -
Installing Ceiling Closure ...............................................................8
Closure Panel
Threaded
Rod
Closure
Trim Frame
Front
Closure
Bracket
Side
Closure
Bracket
Side
Closure
Bracket
Back
Closure
Bracket
Overview -
Planning
1.
Based on screen location and projector
specifications, determine proper position for
projector installation.
2.
Confirm that there is adequate space
for installation and operation. Minimum
clearance above ceiling level varies
according to height of projector, optional
projector mounting bracket, optional ceiling
closure and optional Environmental Housing.
3.
Arrange to provide service access to the unit.
4.
When installed with Environmental Air Space
Housing unit is suitable for use in an environmental
air space in accordance with Section 300.22
(C)
of
the National Electrical Code, and Section 2-128,
12-010
(3)
and 12-100 of the Canadian Electrical
Code, Part 1, CSA C22.1.
5.
Total capacity of lift is 100 or 150 lbs, including
closure, projector, and bracket.
As Soon As AeroLift 100 / 150 Arrives
1.
Open carton and inspect for damage.
2.
Locate the following parts:
A.
The unit itself
B.
Controls
C.
Any optional equipment
TOOLS REQUIRED
POWER DRILL
PENCIL
TAPE MEASURE
HARDWARE
(by others)
LEVEL
PLIERS
HEX WRENCH
SCREWDRIVER
Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385
draperinc.com | 765.987.7999 | 800.238.7999
© 2020 All Rights Reserved
|
FORM: AeroLift100_150_220V_Inst20
AeroLift 100/150 220V
Ceiling-recessed projector lift with a 100 lb
(45kg)
or 150 lb
(68kg
) lifting capacity
INSTRUCTIONS
INSTALLATION & OPERATION
If you have any difficulties installing or servicing your
AeroLift 100/150, call your dealer or Draper, Inc.
