Draper 58157, Инструкция по эксплуатации

Страница: 6 / 12

- 6 -
Fig. 1
Fig. 2
Fig. 3
Fig. 4
OPERATING INSTRUCTIONS
PUMP UNIT
1. Connect the hydraulic ram and pump unit hose
together, ensure you have securely fastened the
couplings before pumping.
2. Firmly close the release valve
✪✌
by turning it in
a clockwise direction. Fig. 1.
3. Apply pressure to the pump
✫✌
by pumping the
handle
✬✌
up and down. Fig. 1.
4. To release the pressure turn the valve
anti-clockwise.
NOTE: The pump can be used in any position, i.e.
horizontal to vertical. Always keep the hose
end of the pump unit facing downwards when
positioned vertically. Fig. 2.
POSITIONING
Ram: To move the ram
✭✌
into the required
position loosen the bolts
✮✌
and slide
into place. Tighten the bolts before
operating the ram.
Fig. 3.
Work table: The height of the work table
✯✌
is
adjusted by removing the support pins
✰✌
and relocating in a higher or lower
hole in the main frame
✱✌
.
NOTE: The table should always remain
level.
✬✌
✫✌
✮✌
✰✌
✰✌
✯✌
✱✌
✭✌
✪✌