GENERAL SAFETY INSTRUCTIONS
FOR HYDRAULIC PRESS
1.
KNOW YOUR HYDRAULIC PRESS
Read and understand the owner's manual and
labels affixed to the tool. Learn its application
and limitations as well as the specific potential
hazards peculiar to this tool.
2.
KEEP WORK AREA CLEAN
Cluttered areas and benches invite accidents.
Floors must not be slippery due to oil or
sawdust.
3.
KEEP CHILDREN AWAY
All visitors should be kept a safe distance
from work area.
4.
WEAR PROPER CLOTHING
Do not wear loose clothing, neckties or
jewellery (rings, wristwatches) to catch in
parts. NONSLIP footwear is recommended.
Roll long sleeves above the elbow.
5.
USE SAFETY GOGGLES (Head Protection)
Wear CE approved safety goggles at all times.
Normal spectacles only have impact resistant
lenses, they are NOT safety glasses. Also, use
face or dust mask if application is dusty.
6.
STAY ALERT
Always watch what you are doing and use
common sense. Do not operate a tool when
you are tired or under the influence of alcohol
or drugs.
7.
NEVER STAND ON TOOL
Do not store materials above or near the tool,
so that it is necessary to stand on the tool to
reach them.
8.
CHECK DAMAGED PARTS
Check for damage to parts, breakage of parts,
mountings and any other conditions that may
affect its operation. A part that is damaged
should be properly repaired or replaced.
9.
MAINTAIN TOOLS WITH CARE
Keep tools clean for the best and safest
performance. Follow instructions for
lubricating and changing accessories. Always
keep the hand grips on the tool clean, dry and
free of oil and grease.
10.
USE RECOMMENDED ACCESSORIES
Consult the owners manual for recommended
accessories. Follow the instructions that
accompany the accessories. The use of
improper accessories may cause hazards.
11.
SECURE WORK
Use clamps or a vice to hold work.
12.
DO NOT OVERREACH
Keep proper footing and balance at all times.
13.
USE RIGHT TOOL
Do not force the tool or attachment to do a job
for which it was not designed.
14.
DO NOT FORCE TOOL
It will do the job better and safer at the rate
for which it was designed.
-
3
-
WARNING
Please read the following instructions carefully, failure to do so could lead to serious personal injury.
IMPORTANT
Draper Tools Limited recommends that this hydraulic press should not be modified or used for any
application other than that for which it was designed. If you are unsure of its relative applications do not
hesitate to contact us in writing and we will advise you.
IMPORTANT NOTE
Residual Risk.
Although the safety instructions and operating manuals for our tools contain extensive
instructions on safe working, every tool involves a certain residual risk which can not be completely
excluded by safety mechanisms. Tools must therefore always be operated with caution !
Содержание 58157
Страница 11: ... 11 NOTES ...
