- 8 -
ASSEMBLY
To fit the eye shields to the bench grinder
attach clamp
✺✌
to the wheel guard using lock
knob
✻✌
large star washer
✼✌
and large
washer
✽✌
as shown in Fig.8. Insert mounting
rod
✾✌
into the clamp
✺✌
, position as
required and tighten lock knob
✻✌
. The eye
shield is fully adjustable. It can be adjusted by
either loosening the lock knob
✻✌
and moving
the rod
✾✌
or by moving the eye shields.
ATTACHING THE COOLING TROUGH
(GHD200 ONLY)
Attach the cooling trough to the bench grinder
by inserting the lug on the bottom of the tray
into the hole in the base at the front of the
bench grinder. See Fig.9.
Fastening the Bench Grinder to a Bench
Securely bolt the bench grinder to a
workbench through the two holes (GHD200 -
four holes), in the base of the machine. Ensure
there is enough clear area around the grinder
to accommodate larger items which may be
ground, ie. garden tools, etc.
✺✌
✾✌
Fig.8.
Fig.9.
✻✌
✼✌
✽✌
