background image

– 4 –

7.5 Locating a Hot Spot

3 

Fig.

To locate points with abnormally high or low temperatures, keep the 

trigger depressed while scanning the target surface with a zig-zag motion 

until the problem area is identified.

8. Maintenance and Disposal

8.1 Cleaning and Storage

•   Clean the product regularly using a dry cloth or cotton bud 

ONLY.

 

CAUTION! NEVER use aggressive chemicals to clean the product 

as they may damage plastic or insulated parts.

•   Take particular care when cleaning the thermometer lens.
•   Remove the battery before storing the product for extended periods.
•   Store the product in a lean and dry location, out of direct sunlight and 

out of reach of children.

•   Store the product at an ambient temperature of 15~50°C (-4~122°F).

8.2 Replacing the Battery

Important: ALWAYS allow the thermometer to switch itself off before 

removing the battery.

4 

Fig.

The thermometer is powered by a 9V PP3 type battery (supplied).
To install or replace battery:
1.  Using the cover release indents (5), pull outwards on the battery 

compartment cover (4) to open it.

2.  Remove the installed battery from the compartment and disconnect it 

from the contacts.

3.  Connect a new battery to the contacts, observing the correct polarity.
4.  Insert the battery into the compartment and close the cover securely.
Important: Dispose of old batteries responsibly and in accordance 

with local regulations.

8.3 Returns and Disposal

For servicing, and repair and replacement options, please contact the 

Draper Tools Product Helpline for details of your nearest authorised 

agent.
Any servicing or repairs carried out by unauthorised personnel or 

installation of spare parts not supplied by Draper Tools will invalidate 

your warranty.
At the end of its working life, dispose of the product responsibly and in 

line with local regulations. Recycle where possible.

• 

  DO NOT dispose of this product with domestic waste; most local 

authorities provide appropriate recycling facilities.

• 

  DO NOT incinerate.

• 

  DO NOT burn or mutilate batteries; this may release toxic or corrosive 

substances. 

•   Dispose of the battery in accordance with local regulations or return 

it to your warranty agent or stockist for recycling.

Battery Compartment

Содержание 15101







Отзывы: