– 2 –
3. Scope
This product is designed to measure the temperature of industrial
equipment and surfaces without making contact.
WARNING! This product is NOT suitable for measuring the
temperature of humans or animals. NEVER point this product directly
at yourself or any other person.
Important: This product is NOT designed for continual temperature
monitoring.
Any other application beyond the conditions established for use will be
considered misuse. Draper Tools accepts no responsibility for improper
use of this product.
Part of our core range, this product is suitable for regular use by
enthusiasts and tradespersons alike.
WARNING! This product is not a toy and must be respected.
Read this manual in full before attempting to use this product and retain
it for later use. Always use the latest version of the manual.
4. Health and Safety Information
Important: Read all the Health and Safety instructions before attempting
to operate or maintain this product. Non-compliance with these
instructions may result in injury.
Important: This product is intended for use as a guide and screening tool
ONLY. For precise readings, a specially engineered tool should be used.
WARNING! This product is not suitable for use on humans or animals.
This product utilises a Class 2 laser. DO NOT stare into the beam or
expose users of telescopic elements.
Viewing the laser pointer output with certain optical instruments (e.g.
eye loupes, magnifiers and microscopes) with a distance of 100mm
may pose a hazard to the eyes.
Viewing the laser pointer output with certain optical instruments
designed for use at a distance (e.g. telescopes and binoculars) may
pose a hazard to the eyes.
CAUTION! DO NOT touch the thermometer lens as this may damage it
and cause inaccurate readings.
Use of controls or adjustments or the performance of procedures
outside the scope of these instructions may result in radiation
exposure.
• Observe all standard safety precautions and good practices when
working with electrical equipment and batteries.
• Inspect the product before every use for evidence of battery leakage
and corroded parts.
WARNING! DO NOT use this product if any part has corroded or the
battery has leaked. Contact Draper Tools for repair and
replacement options.
•
DO NOT allow battery acid to come into contact with your eyes or
skin.
− If contact occurs, flush with plenty of water for at least 15
minutes and seek immediate medical attention.
•
NEVER burn, piece or mutilate batteries as this may cause toxic or
corrosive materials to be released.
•
DO NOT attempt to modify this product or amplify its output in any way.
•
DO NOT stare into the laser.
•
DO NOT direct the laser beam towards yourself, another person or
animals; take additional care to avoid their eyes.
•
DO NOT direct the laser in a way that may lead to unintentional eye
exposure for passing pedestrians or traffic.
•
DO NOT direct the beam onto reflective surfaces.
•
DO NOT expose this product to water or wet environments.
•
DO NOT use this product in environments that exhibit a strong
electrostatic or magnetic field.
•
DO NOT use the product in the vicinity of children.
•
DO NOT leave this product unattended.
•
ALWAYS remove the battery when not in use.
•
DO NOT charge non-rechargeable batteries.
5. Specification
Stock No.
15101
Part No.
IT12:1B
Distance to spot size
12:1
Accuracy
0~550°C (32~1,022°F)
±1.5°C (±2.7°F)
-55~0°C (-58~32°F)
±3.0°C (±5.0°F)
Power supply
9V battery (supplied)
Operating temp.
0ºC ~ 40ºC (32ºF ~ 104ºF)
Storage temp.
-20ºC ~ 60ºC (-4ºF ~ 140ºF)
Typical battery life (Alkaline)
Laser pointer inactive
22h
Laser pointer active
12h
Dimensions
W 101 × H 153 × D 43mm
Weight (inc. batteries)
0.148kg
Laser classification
Class 2
6. Product Overview
(9)
(6)
(7)
(8)
(10)
(1)
(4)
(2)
(3)
(5)
(1) Trigger
(2) Laser aperture
(3) Thermometer lens
(4) Battery compartment cover
(5) Cover release indents
(6) Control panel
(7) LCD display
(8) Backlight toggle button
(9) Laser pointer power button
(10) Unit toggle button
