RF OUTPUT
120 VAC 60 Hz
35 WATTS
AC POWER
RS232
ASI OUTPUT
R
F
IN
P
U
T
D
T
D
10
00
IN
OUT
D
T
D
10
00
R
F
IN
P
U
T
MEQ1000 -
The top illustration is shown above with
ASII
ASI Input and
DTD1000
Digital Tuner and
Demodulator Modules installed.
The ASI connectors
are type BNC female. The ASI input is used to input the
ATSC transport stream in ASI format instead of RF.
The lower illustration shows the MEQ1000 with
SDE24
and
ASII
modules installed.
R
1, RF OUTPUT
– This is the high level (61 dBmV), 54 to
1002 MHz, output from the MEQ1000 upconverter section.
R2, Ventillation slots. -
Do not block air entering these
slots.
R3, Input Module Slot A
R4, Input Module Slot B.
R5, ASI Output -
This output delivers the same multi
program transport stream in ASI as is sent to the QAM
modulator.
R6, RS232 in -
Connection to a PC or modem for use with
remote control / monitoring program or for firmload
download.
R7, RS232 OUT -
Loop to another MEQ1000.
R8, AC Line Cord
– For connection to the nominal
120 VAC power source. This unit is designed for use in
R1 R2 R3 R4 R5 R6 R7 R8
countries with 120 VAC power standards but the power
supply will accept an input voltage range of 90 VAC
minimum to 260 VAC maximum with a power line fre-
quency of either 50 or 60 Hz.
R9, ASI Input type BNC connector -
Applies to ASII
module, if present. This input is for a 270 MHz clocked
SPTS or MPTS serial input. The maximum data rate is 80
Mbps for a given ASII module.
R10, ASI Loop type BNC connector -
Applies to ASII
module, if present. Provides a looped out transport stream
identical to what is input to jack R9.
R11, RF Input type F connector -
Applies to DTD1000
module, if present. This is the antenna or CATV source
input.
R12, AUDIO 1 & 2 -
These four color coded RCA type
connectors provide audio
L
eft (white) and
R
ight (red) inputs
to the SDE24 Encoder.
R13, VIDEO 1 & 2 -
These two RCA type connectors color
coded yellow provide two separate video inputs to the
SDE24 Encoder.
R14, S-VIDEO 1 & 2 -
These S-Video type connectors
provide two separate S-Video inputs to the SDE24 En-
coder.
8 Rear Panel Connections
R11
RF OUTPUT
120 VAC 60 Hz
35 WATTS
AC POWER
RS232
ASI OUTPUT
A
S
I
IN
P
U
T
A
S
I
L
O
O
P
A
S
II
IN
OUT
S
D
E
2
4
2
1
A
U
D
IO
R
L
2
1
2
1
V
ID
E
O
S
-V
ID
E
O
2
1
With Two DTD1000 Modules
With One SDE24 Module and one ASII Module
R12 R13 R14 R10 R9
