DragonEye Compact Speed LIDAR Operator Manual
28
DragonEye Technology, LLC |Doc. 30666 Rev. 03
shoot the second reference object and press Enter
when
satisfied with the distance reading. The unit will show the distance
between the reference objects.
At this point you have either entered the reference distance or
determined it by shooting the reference objects. If the reference
distance is acceptable, Press Enter
. Otherwise press the
Menu
button to “escape” from the menu system.
Once the reference distance is accepted, the side display will show
the reference distance and instructions to “Click Trigger to Start”.
Click the trigger when a vehicle crosses the first reference object
point to start the timer. Click the trigger a second time to stop the
timer. The unit will display the average speed of the vehicle on the
side panel.
To measure the average speed of additional vehicles, simply click the
trigger once to clear the old reading and timer is re-armed for a new
reading.
Load Defaults
The factory default settings for the LIDAR can be restored at any
time by pressing
then selecting “Load Defaults” using the
up/down arrows
and pressing Enter
. This
command restores default brightness and audio levels as well as
settings for Minimum and Maximum range values.
MODE
ENTER
MODE
ENTER
MENU
MENU
MODE
ENTER
