DragonEye Compact Speed LIDAR Operator Manual
24
DragonEye Technology, LLC |Doc. 30666 Rev. 03
To set the Direction Filter, press the Menu button
then use
the up/down arrows
until “Direction Filter” is
displayed on the side panel. Press the Enter button
and then
use the up/down arrows to display the desired filter setting:
APPROACH, RECEDE, or BOTH. Press Enter
to accept the
setting.
The LIDAR will return to the current operating mode (range or
speed).
Note: If a vehicle is targeted in a direction opposite that of the
Filter selection, the LIDAR will still output the solid audible tone,
however the HUD and side panel will show “----“ in the speed
display area. The side panel will also display the indication
“Approach” or “Recede” to indicate that a vehicle has been
targeted traveling in a direction opposite to that of the Filter.
HUD Reticle Type Selection
Your DragonEye Compact Speed Lidar may provide the option of
selecting either the standard split oval aiming reticle or a more basic
red dot aiming reticle. To select your desired reticle, press the Menu
button
then use the up/down arrows
until
“HUD Reticle” is displayed. Press the Enter button
and then
use the up/down arrows to display the desired reticle type: OVAL or
DOT. Press Enter
to accept the setting.
MENU
MODE
ENTER
MODE
ENTER
MENU
MODE
ENTER
MODE
ENTER
