DragonEye Compact Speed LIDAR Operator Manual
DragonEye Technology, LLC / Doc. 30666 Rev. 03
19
Speed Display Lock
Once a desired speed reading is acquired, the operator can “lock”
the speed reading on the side panel display by simply releasing the
laser fire trigger. If a speed reading is lost after tracking a vehicle,
the last speed reading will flash for approximately two seconds,
giving the operator an opportunity to lock in the vehicle’s speed.
Note: The flashing speed reading will be immediately over written if
the operator acquires a new speed reading.
Speed Display Lock Retention
Once a speed is locked into the side display, it will be retained there
for up to 20 minutes. If the laser fire trigger is pressed within 30
seconds after the speed is locked, the display will clear and prepare
for a new reading. If no buttons are pressed for 30 seconds after the
speed reading is locked, the unit will go into a sleep mode, turning
off the HUD and displaying “Power-Save” on the side panel along
with the locked reading. In the Power-Save state, a first laser trigger
press and release will “wake” the LIDAR but retain the locked
reading. A second trigger press will then clear the reading. This
feature is intended to aid in preventing the operator from
accidentally clearing the locked reading.
Range Mode
The LIDAR system can be used to measure distances to a variety of
targets. To enter Range Mode, press the Mode Button
until
the side panels displays:
MODE
ENTER
