DragonEye Compact Speed LIDAR Operator Manual
22
DragonEye Technology, LLC |Doc. 30666 Rev. 03
possible the LIDAR will receive signals from these objects preventing
a reading from being displayed on the targeted vehicle.
Poor Weather Mode
Select Poor Weather Mode to improve the LIDAR’s ability to shoot
through rain, snow, fog, or other airborne particulates such as heavy
dust or sand. The Weather indicator
will be displayed in both
the HUD and the side panel display. In Weather mode, the LIDAR
will not acquire any targets within 76 metres. However, due to its
smart target-lock capability, the LIDAR will continue to track
oncoming cars inside the 76 metre limit, provided they were
initially acquired outside of this range.
Minimum and Maximum Ranges (Range Window)
While in Speed mode, The Minimum and Maximum Range settings
are used to set limits (or a range window) outside of which, speed
readings will not be displayed.
To adjust either of these settings, press the menu button
and
then use the up/down arrows
to display “Minimum
Range” or “Maximum Range”. Press the Enter button
to
select. The display will give you the option to use the up/down
arrows to set the range or “shoot object” to use the LIDAR’s range
function to set the range limit. To manually set the range, simply
use the up/down arrow buttons to set the desired limiting distance.
If the arrow buttons are held down, the units will change in larger
increments after about 10 seconds. When the desired range value is
in the display, press the Enter button
to accept.
MENU
MODE
ENTER
MODE
ENTER
