Dräger X-plore 3300, Инструкция по эксплуатации

Страница: 23 / 172

Use
X-plore 3000 23
2. Position two respiratory filters (refer to figure C1: The line
markings must line up!) and insert them until they lock into place
(refer to figure C2) by twisting each respiratory filter downwards
until a stop is felt.
Ensure that the line marking of the respiratory filter is above the
end of the arrow.
CAUTION
When fitting the respiratory filters, make sure that the mask
body is not being kinked.
Otherwise, the mask body could be damaged.
WARNING
The bayonet catch must always be fitted on both sides! The
respiratory filter must be straight when locked in position!
Always use two respiratory filters of the same type.
If this warning is not heeded, poisoning or death can result.
NOTICE
for Dräger X-plore 3500:
By releasing the clasp, the half mask can be comfortably
placed on your chest (refer to figure G).
!
!
i i