Dräger D-Vapor, Инструкция по эксплуатации

Страница: 56 / 120

Operation
56
Instructions for use D-Vapor / D-Vapor 3000
Plug-in adapter S-2000 (D-Vapor only)
Only use white plug-in adapters for the D-Vapor.
1 Drop-in pin (A) on locking lever secure and
straight.
2 Both valve control pins (B) present.
3 Stop mechanism (C) undamaged, not bent.
4 Sealing surfaces (D) undamaged.
5 Interlock pins (E) undamaged, glide easily, and
cannot be removed.
6 Attachment plate (F) on the back of the
vaporizer present and secure.
ISO conical adapter (D-Vapor only)
 Male cone connected to vaporizer inlet.
 Female cone connected to vaporizer outlet.
 Cones and sealing surfaces undamaged.
Permanent connection (D-Vapor only)
 Vaporizer fixed securely to connector.
Filling systems
Baxter SAFE-FIL filling system for desflurane
(Suprane) and Piramal Fill filling system for
desflurane (Torrane)
Discoloration and contamination of the
anesthetic agent
 If there is contamination shown by
discoloration, have the vaporizer repaired by
specialized service personnel.
Concentration check
 Check the delivered concentration of anesthetic
agent weekly when continuous monitoring is not
available, see page 57.
Checking according to the checklist
 Check the vaporizer according to the checklist,
see page 59.
Checking emergency power operation
Prerequisite: The battery has been charged for
1 hour.
 Set the flow to 4 L/min and the control dial to
6 Vol%.
The vaporizer must dose for 5 minutes in battery
operation.
043
A
E E
D D
C
F
B B