Dräger Alcotest 6810 GB, Инструкция оператора

Страница: 13 / 32

13
Performing the measurement
●
Ask the test subject to blow evenly into the mouthpiece without interruption. A sufficient
flow is indicated by a continuous tone and a green light.
While the sample is taken the display shows: "Blow"
When the sampling was successful the green light is going to cease and the continuous tone
is going to stop.
The display shows:
"WAIT Analyzing"
Test result
After 5 to 25 seconds (depending on the instrument temperature and the measured concen-
tration) the measured value is shown on the display.
ZERO / PASS
or
ALERT (in ROAD mode only)
or
FAIL
It is also possible to show the value in a decimal presentation, if required by respective autho-
rities. Once the result is shown, this part of the test data is already stored.
0
1
7
239
7
3_1_en.eps
Blow
0
1
8239
7
3_1_en.eps
Analyzing
WAIT
068239
7
3_1_en.eps
ZERO
062239
7
3_1_en.eps
PASS
06
7
239
7
3_1_en.eps
ALERT
063239
7
3_1_en.eps
FAIL
0
064239
7
3_1_en.eps
μ
g/100 ml