Battery Charging System
Your Draganflyer X8 comes equipped with a complete charging unit for the batteries used
by the Draganflyer X8 system. It has been designed for ease of use, portability, safety and
convenience so down time due to depleted batteries is minimal.
Included with the Draganflyer X8 charging system is;
1 - XP Power - regulated AC power source
1 - TP 820 CD, Digital Balancer & Charger/Discharger (User’s Manual included)
2 - 6 wire balancer to battery cables
2 - Battery to Charger cables
1 - 6' DC Power source to Charger cable
1 - Lipo Sack
Set Up and Operation
Use only provided batteries that are designed exclusively for use with
the Draganflyer X8 helicopter.
Never leave batteries charging while unattended.
The Draganflyer X8 Charging System is capable of:
•
Charging the Draganflyer X8 battery
•
Charging the Draganflyer X8 handheld controller
•
Charging 2 Draganflyer X8 battery packs simultaneously
•
Charging one battery pack and the DraganflyerX8 controller
Connecting Charger to Power Source
1. If using the included AC power supply, remove the supply from the case, connect
it to the power input of charger, and plug supply into AC outlet
2. If using 12V battery (car battery), connect the provided cable to the charger and
connect the clips to the terminals of your 12V battery (red clip to positive, black
clip to negative)
Draganflyer X8 – Users Manual
56
07/13/11 Ver 11-01 e
Содержание DRAGANFLYER X8
Страница 1: ...DRAGANFLYER X8 USERS MANUAL...