Dr. Zanolli ASADOR G, Инструкция по установке, эксплуатации и обслуживанию

Страница: 25 / 32

8. MAINTENANCE
ASADOR 5G
– 10G – 15G – 20G – 30G – 40G
23
Fig. 8.1
For optimum performance, the chain must have about 1cm of
elasticity. An excessively tight chain will put unnecessarily load on the
motor.
8.3 Changing the type of gas supply
WARNING! The instructions for the procedure that follows are
intended for use by maintenance instructions are intended only for a
staff qualified for the installation and maintenance of electrical and
gas equipment. Maintenance by other persons may cause damage to
the equipment, persons, animals or property.
Ensure that the main gas tap is closed.
1. Extract the security valve knob (3) (Fig. 8.2).
2. Unscrew the screws that fix the cover to the command panel.
3. Completely unscrew the screws (9) and extract the tube (19).
4. Extract part (8). Take out parts (5); (6) and (7).