Dr.Thiedig Digox 6, Руководство по эксплуатации

Страница: 30 / 62

30
5.2.1.2 Recording and saving
measuring values
Starting the data logger:
1. Mark the menu item START/STOP in the
menu
DATA LOGGER//CONTINUOUS and press
to confirm.
The message DATA LOGGER RUNNING will
appear.
2. After starting the data logger, the menu
automatically returns to the measuring mode.
NOTE:
Recording of data is possible only when the data
logger is in the measuring mode. When a menu is
opened with or no data are recorded.
Stopping the data logger:
1. Mark the menu item START/STOP in the
menu
DATA LOGGER//CONTINUOUS and confirm
with .
The message DATA LOGGER STOPPED will
appear.
2. After stopping the data logger, the menu
automatically returns to the measuring mode.
Other possible messages:
•
"The data logger is running. Do you want to
stop it? (Touchkey / ENTER)“
To stop the data logger press to confirm.
•
"The data logger has already recorded three
series of measurement.“
A new start of the logger is possible only after
deleting the data (please see hint section 5.2).
5.2.2 How to operate the measuring point
data logger (optional)
1. Connect the TouchMemory stick with the
Digox 6 (see figure 1.2) and work in the
"Measuring“ screen.
2. If you want to record the current value, touch
the stick on the measuring point Touchkey.
The name of the measuring point and the
current measuring value is displayed and then
saved.
3. If the user of the device changes, the new
user touches the stick on his/her User
Touchkey.
The current user is displayed briefly and then
saved.
5.2.3 Output of measuring values
There are two possibilities of reading out the
measuring values saved in the Digox 6 :
•
The supplied DigoxWin program can be used
to read out the measuring values.
•
The measuring values of the measuring point
data logger can be displayed.