Mach LED 500DF
Dr. Mach
Lamps and Engineering
59190002
Edition 05
15.09.2014 / Bak We page
20/26
5.2 Electrical data
Mach LED 500DF
Power consumption
70 W
Operating voltage DC
24-30 V
Current
2,9 A
Class of protection
I.
5.3 Information regarding the electrical installation
When turned ON, the OT-light MACH LED 500DF is exposed to a current peak.
The OT-light MACH LED 500DF is delivered with a Dr. Mach power supply.
It is an electronic power supply with a wide-range input, input voltage 100 – 240V AC, 50 – 60Hz, output
voltage 28V DC.
In case there is a switch-over relay needed for an emergency power supply on site, this switch over relay
must be ordered separately at Dr. Mach.
In case of a power supply provided by the customer, the following points must be observed:
The OT-light works with 24V – 30V DC (direct voltage).
The direct voltage provided by the hospital must have a maximum undulation of 5%.
A higher voltage (28V – 30V DC) is recommended, this causes a decrease in heat development
of the light.
Warning!
The light is class I. equipment. In order to avoid the risk of an electric shock, the equipment must
be connected to a mains supply with protective earth.
5.4 Weights
Light
Weight
Mach LED 500DF
20,5 kg*
* without handle
