Mach LED 500DF
Dr. Mach
Lamps and Engineering
59190002
Edition 05
15.09.2014 / Bak We page
23/26
8. Electromagnetic compatibility
The Dr. Mach OT- and examination lights are subject to special preventive measures regarding the
electromagnetic compatibility and must be installed according to the EMC-instructions mentioned in the
accompanying documents.
The function of the OT- and examination lights can be affected by portable and mobile HF-communication
devices.
The use of other equipment than the equipment mentioned in chapter 2. leads to an increased
emission or to a reduced interference resistance of the device.
For the intended use of the OT-light MACH LED 500DF it is required that the light MACH LED
500DF is not mounted immediate and near to other devices or mounted together with other
devices. If operating the light is obligatory near other devices or together with other devices, the
functions of the light MACH LED 500DF must be observed.
Table 1 – Guidance and manufacturer’s declaration – electromagnetic emission
Guidance and manufacturer’s declaration – electromagnetic emission
The MACH LED 500DF is intended for use in the electromagnetic environment specified below. The customer or the user of
the MACH LED 500DF should assure that it is used in such an environment.
Emissions test
Compliance
Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1
The Mach LED 500DF uses RF energy only for its internal function. There-
fore, its RF emissions are very low and are not likely to cause any inter-
ference in nearby electronic equipment.
RF emissions
CISPR 11
Class A
The Mach LED 500DF is suitable for use in all establishments other than
domestic, and may be used in domestic establishments and those directly
connected to the public low-voltage power supply network that supplies
buildings used for domestic purposes, provided the following warning is
heeded:
Warning
: This equipment/system is intended for use by healthcare pro-
fessionals only. This equipment/ system may cause radio interference or
may disrupt the operation of nearby equipment. It may be necessary to
take mitigation measures, such as reorienting or relocating the Mach LED
500DF or shielding the location.
Harmonic missions
IEC 61000-3-2
Class A
Voltage luctuations/
flicker emissions
IEC 61000-3-3
Complies
