Installation | 4
ESUC 41/61/81
17
2. Lift ESUC from the transport pallet.
3. Reset the height of the four contact points from the floor by rotating the foot
shafts (levelling feet), so that the device stands vertically.
4. Lock the foot shafts using the locknuts.
5. Make sure the device is stable and stands firm on the ground.
4.1.2 Version with Rollers
The device must not be operated in any position other than upright on the rollers.
1. Remove the transportation lock.
2. Lift ESUC from the transport pallet.
3. Make sure the device is stable and stands firm on the ground.
4. Lock the front adjustable guide rollers by means of the locking levers.
4.2 Compressed Air Connection
Compressed air quality
The compressed air supply is provided by the customer. The compressed air must com-
ply with the following quality requirements in order to avoid damage to connected
peripheral devices:
▪ technical oil-free
▪ dry
▪ cleaned
▪ maximum residual dust content at least quality class 6 (ISO 8573-1:2010-04):
particle size 5 μm, particle concentration 5 mg/m
3
Furthermore, depending on the cleaning requirements of the application, the com-
pressed air quality requirements can be considerably higher.
WARNING
Risk of injury due to loose compressed air lines and connectors
Loose compressed air lines and connectors can cause severe injury.
w
Before starting any work, depressurise all components.