DR. BENDER PB WX2, Руководство пользователя

Страница: 12 / 19

12
9.0 General safety instructions
1. Read and follow these instructions before you use the tool. Keep these safety instructions in a safe
place.
2. Keep your workplace tidy. Untidiness in the workplace can cause accidents.
3. Protect yourself from electric shocks. Observe the applicable regulations. Avoid physical contact with
earthed parts, such as pipes, heaters, furnaces and refrigerators.
4. Keep children away. Do not allow other people to touch the tool or cable, keep away from your work
area.
5. Keep your tools in a safe place. Unused tools should be kept in a dry, locked room out of the reach of
children.
6. Do not overload your tool. It will work better and more safely in the specified capacity range.
7. Use the correct tool. Do not use tools that are too weak or mounted tools for heavy work. Do not use
tools for purposes and work they have not been designed for.
8. Wear suitable working clothes. Do not wear excessively baggy clothing or jewelry, which may be
caught by moving parts. For working outdoors, we recommend the use of rubber gloves and sturdy
shoes. Wear a hairnet if you have long hair.
9. Use goggles. Use a breathing mask for work that generates dust.
10. Do not use the cable for any purpose other than that for which it is designed. Do not carry the tool by
the cable and do not use it to pull the plug out of the socket. Protect the cable from heat, oil and
sharp edges.
11. Every time before you use the tool, check the connection cable and plug for signs of damage. If they
are damaged, have them replaced by a specialist. Always keep the connection cable away from the
working area of the machine.
12. Secure the work piece. Use clamps or a vice to hold the work piece. Thus it will be held more securely
than in your hand and it will allow you to use both hands to control the machine.
13. Do not overstretch yourself. Avoid abnormal body positions. Ensure that you have a stable standing
position and keep your balance at all times.
14. Look after your materials with care. Keep your tools sharp and clean so that they may work well and
safely. Follow the maintenance instructions and the tool changing indications. Check the plug and
cable at regular intervals and have them replaced by a specialist if they suffer any damage. Check the
extension cable at regular intervals and replace damaged cables. Keep the handles dry and free of oil
and grease.
15. Disconnect the mains plug from the supply when the machine is not in use, before performing
maintenance operations and when changing the tool.
16. Do not leave tool spanners on the machine. Before switching it on, check that the wrenches and
setting tools have been removed.
17. Avoid unintentional starting. Do not carry a tool that is connected to the mains supply with your finger
on the switch. Ensure that the switch is turned off when you connect the tool to the mains supply.
18. Electric tools used outdoors and in wet areas: for additional safety, mobile tools used outdoors should
be connected to the mains supply using stray all-current circuit breakers (FI or DI). This is particularly
important when working with freehand tools.
19. For outdoor work, use only extension cables, which are approved for this purpose and marked
accordingly.
20. Be vigilant at all times. Watch your work. Proceed sensibly. Do not use the tool if you are not
concentrating fully on what you are doing.
21. Important:
Safety equipment (such as overcurrent protection devices, undervoltage trips, safety couplings etc.)
are aids, yet they do not offer guaranteed safety. As a responsible manufacturer, we tailor these tools
to each other so that they offer the best possible protection. But without the care and caution of the
operator, these aids may even cause damage if they are used thoughtlessly. Have the slip couplings,
in particular, checked during the quarterly inspection to ensure that they are correctly adjusted and
function properly. This inspection should be conducted by the manufacturer or by an authorized
service outlet and documented.