11
7.0 Maintenance and care
Warning
Pull out the mains plug before beginning any maintenance or repair work. You
must have the tool checked by a specialized electrician after every repair
(statutory regulation pursuant to VBG4 since 1.1.1990).
7.1 Daily
care
Make sure no water flows out of the tool. This may adversely affect the electrical safety of the equipment.
In this case, please seek assistance from an authorized service workshop.
Visually inspect the switch, supply lead or plug connector for damage.
After completing the work, clean the equipment.
Make sure that no water penetrates into the tools during the cleaning process.
Empty the cooling water after using the machine. (For this, open the ball cock and completely blow off the
cooling water with compressed air). This is very important particularly in winter months because of ice
formation.
7.2
Quarterly
Have the cable, switch and plug connectors inspected by a specialist (regulation pursuant to VBG4) and
document this inspection.
8.0 Warranty
In keeping with our terms of sale, we offer a warranty for twelve months from the date of sale. This refers to
the free repair of material and workmanship defects, which were verifiably caused before the sale.
An original purchase document must always be submitted in case of a warranty claim. It has to contain the
full address of the dealer, the date of purchase and the type designation of the product. The operating
instructions of the particular product and the safety instructions must have been followed.
Damages resulting from operational faults cannot be acknowledged as warranty cases.
The products of the manufacturer have been developed and produced for specific applications. No
warranty claim is accepted in case of non-compliance with the due employment according to the operating
instructions, in case of the employment for other purposes than originally intended or the employment of
inadequate accessories.
The periodical maintenance and cleaning of the products according to the directions of the operating
instructions is absolutely necessary. The intervention of third persons (opening the machine) renders any
warranty claim void.
Maintenance and cleaning operations cannot be claimed on the basis of warranty.
Make sure only original spare parts and original accessories are used. They are available at the authorized
specialized product dealer. If non-original parts are used, consequential damages and increased hazard
cannot be ruled out. The producer is not liable for such damages. Disassembled or partially disassembled
tools and those repaired with non-original parts are excluded from the warranty.
Certain components, such as carbon brushes, ball bearings, switches, power-supply lines, gaskets, etc.,
are exposed to usage dependent or to normal wear. These wearing parts are not object of this warranty.
Wearing parts are marked on the spare parts lists.
Содержание PB WX2
Страница 14: ...14 10 0 Spare parts lists 10 1 Powerbox PB WX2 ...
Страница 16: ...16 10 2 Powerbox PB WX8 10 ...
Страница 18: ...18 10 3 Powerbox PB WX8 10 VB ...