DPtech LSW3003 Series Industrial Ethernet Switch Installation Manual
Chapter 1 Product Introduction
5
(1) 1000M optical interface 0
(2) Slot (SLOT1)
(3) Slot (SLOT 2)
(4) Slot (SLOT 3)
(5) Terminals for power supplies
(6) Terminals for power supplies
Figure1-3
The rear view of DPtech LSW3003-4GP-I-R dual power master device
1.4 Port introduction
1.4.1 Console port
The front panel of LSW3003 series of industrial Ethernet switch has a RS232 asynchronous serial port
configuration (CON), which can be used to connect to the computer terminal and can be used to debug,
configure, maintain and manage and load software for the system.
The Console port attribute table is shown in Table 1-1.
Table1-1
Console port attribute table
Attribute
Description
Connector Type
RJ45
Interface standard
RS232
Baud rate
9600bps
～
115200bps, default is 9600bps
Transmission distance
≤
15m
Support services
Connected to a character terminal
Connect to the local PC serial port and run the terminal
emulator on the PC
Command line interface
1.4.2 10/100Base-T Ethernet interface
1. 100M Ethernet electrical interface properties
Table1-2
100M Ethernet electrical interface properties
Attribute
Description
Connector Type
RJ45
Interface standard
MDI/MDIX auto-negotiation [adaptation]
Supported frame format
Ethernet_II
Ethernet_SNAP
