DPS NetGuardian 16, Руководство пользователя

Страница: 43 / 64

39
to give the most accurate results. See examples below.
Example 1: If you are measuring battery voltage, we want the NetGuardian to show that the input is -54.2 VDC if -
54.2 VDC is really being measured. However, if you are measuring temperature, the values are typically not a 1 : 1
ratio.
Example 2: Your X-Type sensor outputs 4 - 20mA. (We use a 250 ohm resistor to convert current to voltage
measurement. Ohms Law tells us that 4mA x 250 ohms = 5 VDC. The sensor should tell us what the output current
references. In this example, 4mA = 23º F and 20mA = 131º F
OR 1V = 23º F and 5V = 131º F.
Date and Time 11.8
Fig. 11.12 - The Edit > Date and Time menu
Time Settings
Date Select the current month, day, and year from the drop-down menus.
Time Select the current hour, minutes, and time of day fro the drop-down menus.
Automatic Time Adjustment (NTP)
Enable NTP Check this box to enable Network Time Protocol.
NTP Server Address or
Host Name
Enter the NTP server's IP address or host name, then click Sync.
Example: north-america.pool.ntp.org
Time Zone Select your time zone from the drop-down menu.
Adjust Clock for Daylight Savings Time (DST)
Enable DST Check this box to have the NetGuardian 16 observe Daylight Savings.
Start Day Select the month, weekday, and time when Daylight Savings will begin.
End Day Select the month, weekday, and time when Daylight Savings will end.