15
7. The NetGuardian 16's main menu will appear. Type C
for C)onfig, then E for E)thernet. Configure the unit's IP
address, subnet mask, and default gateway.
8. ESC to the main menu. When asked if you'd like
to save your changes, type Y for Y)es. Reboot the
NetGuardian 16 to save its new configuration.
Be sure to change the IP of your computer back to one that operates on your network.
Now you're ready
to do the
rest of your configuration via LAN. Plug your LAN cable into the NetGuardian 16 and see Section 9, "Logging On to
the NetGuardian 16" to continue databasing using the Web Browser.
...via LAN
7.2
Connection through Ethernet port
To connect to the NetGuardian 16 via LAN, all you need is the unit's IP address (Default IP address is
192.168.1.100).
If you DON'T have LAN, but DO have physical access to the NetGuardian 16,
connect using a LAN crossover
cable.
NOTE:
Newer PCs should be able to use a standard straight-through LAN cable and handle the crossover for
you. To do this, you will temporarily change your PC's IP address and subnet mask to match the NetGuardian's
factory default IP settings. Follow these steps:
1. Get a LAN crossover cable and plug it directly into the NetGuardian 16's LAN port.
2.
Look up your PC's current IP address and subnet mask, and write this information down.
3.
Reset your PC's IP address to
192.168.1.200
. Contact your IT department if you are unsure how to do this.
4.
Reset your PC's subnet mask to
255.255.0.0
. You may have to reboot your PC to apply your changes.
5.
Once the IP address and subnet mask of your computer coincide with the unit, you can access the
NetGuardian 16 via a Telnet session or via Web browser by using the unit's default IP address of
Содержание NetGuardian 16
Страница 13: ...9 Fig 5 5 Optional 66 block connector pinout for controls...
Страница 62: ......
