DPS NetGuardian 16, Руководство пользователя

Страница: 23 / 64

19
NetGuardian 16 Web Browser
9
The NetGuardian 16 features a built-in Web Browser Interface
that allows you to manage alarms and configure the unit
through the Internet or your Intranet. You can quickly set up
alarm point descriptions, view alarm status, issue controls,
and configure paging information, and more using most
commonly used browsers.
NOTE : Max # of users allowed to simultaneously access
the NetGuardian 16 via the Web is 4.
Logging on to the NetGuardian 16 9.1
For Web Interface functionality, the unit must first be configured with some basic network information. If this step
has not been done, refer to the section "Quick Start: How to Connect to the NetGuardian 16" for instructions on
initial configuration setup.
1. To connect to the NetGuardian 16 from your Web browser, enter its IP address in the address bar of your web
browser. It may be helpful to bookmark the logon page to avoid entering this each time.
2. After connecting to the unit's IP address, enter your login information and click OK. NOTE: The factory default
username is " admin " and the password is " dpstelecom ".
3.
In the left frame you will see the Monitor menu (blue) and Edit menu (green) The Monitor menu links are used
to view the current status of alarms. The Edit menu is used to change the unit's configuration settings. All the
software configuration will occur in the
Edit menu. The following sections provide detailed information regarding
these functions.
Fig. 9.1. Enter your password to enter the NetGuardian 16 Web Browser Interface