![background image](http://html1.mh-extra.com/html/dps-telecom/d-pk-smsbx-12021/d-pk-smsbx-12021_user-manual_2525739025.webp)
21
...via LAN
7.2
To connect to the Cell2 Interface via LAN, all you need is the unit's IP address (Default IP address is
192.168.1.100).
If you DON'T have LAN, but DO have physical access to the Cell2 Interface,
connect using a LAN crossover
cable.
NOTE:
Newer PCs should be able to use a standard straight-through LAN cable and handle the crossover for
you. To do this, you will temporarily change your PC's IP address and subnet mask to match the Cell2 Interface's
factory default IP settings. Follow these steps:
1. Get a LAN crossover cable and plug it directly into the Cell2 Interface's LAN port.
2.
Look up your PC's current IP address and subnet mask, and write this information down.
3.
Reset your PC's IP address to
192.168.1.200
. Contact your IT department if you are unsure how to do this.
4.
Reset your PC's subnet mask to
255.255.0.0
. You may have to reboot your PC to apply your changes.
5.
Once the IP address and subnet mask of your computer coincide with the unit, you can access the Cell2
Interface via a Telnet session or via Web browser by using the unit's default IP address of
192.168.1.100
.
6.
Provision the Cell2 Interface with the appropriate information, then
change your computer's IP address
and subnet mask back to their original settings.
Now you're ready
to do the rest of your configuration via LAN. Plug your LAN cable into the Cell2 Interface and see
Section 9, "Logging On to the Cell2 Interface" to continue databasing using the Web Browser.
Содержание D-PK-SMSBX-12021
Страница 12: ...8 Cell2 Interface Back Panel 6 Cell2 Interface back panel connections...
Страница 48: ...44 Stats 12 4...