6
Mounting
4.2
The Cell2 Interface can be flush or rear-mounted
The compact Cell2 Interface occupies only half the width of a standard rack unit. Only one rack ear is supplied with
the Cell2 Interface, and the rack ear can be mounted on the left or right side of the unit. The Cell2 Interface mounts
in a 19" or 23" rack, and can be mounted on the right or left, in the flush-mount or rear mount locations, as shown in.
The rack ears can be rotated 90° for wall mounting or 180º for other mounting options.
Use the included wall mount bracket to mount the Cell2 Interface vertically on the wall.
Wall-Mounting Instructions
The rack ears can be rotated 90° for wall mounting or 180º for other mounting options (not shown).
1. Depending on your order options, you will can attach wall-mount flanges to both sides of the unit in one of two
ways:
a. Place the flange over the protruding screws and fasten it to the 3/8" hex nuts provided.
b. OR Fasten the flange to the Cell2 Interface with two of the 6/32 screws provided. (
NOTE
: Screws longer than
those provided may contact the internal components of the unit, adversely affecting its normal operation.)
2. After flanges have been attached to the Cell2 Interface, mount the unit in the desired location with two screws
through each flange.
Содержание D-PK-SMSBX-12021
Страница 12: ...8 Cell2 Interface Back Panel 6 Cell2 Interface back panel connections...
Страница 48: ...44 Stats 12 4...