01
11
Before You Start
AM Tuner Section
CD Player Section
522-1620(KHz)
(Europe/Russia)
530-1710 (KHz)
(U.S.A.)
450KHz
35dBuV
VCD signal system
PAL/NTSC
60dB
55dB(1KHz)
0.1%
General
FM Tuner Section
87.5-108(MHz)
(Europe)
87.5-107.9(MHz)
(U.S.A.)
10.7MHz
10dBuV
60dB
30dB
1KHz
30-15000Hz
Note:
Due to continuous product improvement,
specifications and design are subject to
change without prior notice.
Specifications
Power requirement
14.4V DC
(11-16V allowable)
4
Load impedance
10dB
Bass 100Hz
Treble 10KHz
Tone controls
Approx.192 x 178 x50
mm (d/w/h)
Dimensions
Approx.1.75kg
Weight
Mounting
dimensions
Approx.169 X 182X53
mm (d/w/h)
Tuning range
IF range
Usable sensitivity
(-30dB)
Signal-to-noise ratio
Stereo separation
Frequency response
Frequency range
IF range
Usable sensitivity
(-20dB)
Signal-to-noise ratio
Separation
Distortion
DVD Player Section
Number of channel
5Hz to 20,000Hz
98dB
60dB
Frequency response
Dynamic range
Signal-to-noise ratio
2 channels
Less than
measurable limit
Wow and flutter
65-74(MHz)
Russia)
Max.power output
45W X 4
(Optional )
(Optional )
34
06
VCD/CD/MP3/MPEG-4/USB/SD
Number Buttons
During playback,
you any
track
directly by
can select
using the number buttons on
the remote.
MO/ST Selector
During VCD
playback, repeatedly press
AUDIO
button on the remote control to
change audio channels in the following
sequence:
Mono left
Mono right
Stereo
6
Program Playing
While in VCD/CD mode, you can program
the playback sequence of your choice as
follows:
1. Press PROG on the remote to display the
program menu.
2. Use the number buttons to select tracks.
3. Press button to move the cursor to
START, then press ENTER to start playing
your sequence.
To stop playing your program, move the
cursor to EXIT and press ENTER.
You can always cancel the program by
pressing PROG or the stop button.
Using VCD Menus
Some VCDs are created with interactive
menus that allow you to play tracks in the
order of your choice, rather than simply
playing the whole disc through from the
beginning. Using the menu is a mode in itself
called PBC mode, which stands for
playback
control
.
To enter or exit PBC mode, simply press the
TITLE button. While viewing the disc menu,
use the number buttons to select a track, and
you can return to the VCD menu anytime by
pressing the MENU button on the remote.
Note:
VCD menus(or PBC) conforms version 2.0 of
SVCD/VCD disc only.
*
Setting Playback Duration
You can use the remote control to stop play-
back after a certain amount of time, which
some people may refer to as
sleep
function.
In CD mode, press
GOTO
,
and the display
shows :
disc go to:--:--
, press your desired
time of the playback by using number buttons.
Secondly press GOTO button,
track go to
:--:--
appears on the display, also input your
desired numbers to play the current time of
your selection.
2
In VCD mode, press GOTO button to set
the playing time, which will display :
. Press [ ][ ] to select the options,
press ENTER to set the status.Then press
NUMBER BUTTONS or [ ][ ] to set
the current status.
track/disc time/track time/repeat/time
disp
24
2
In MPEG-4 mode, press
GOTO
first to
display :
select:---
, input the numbers to
play the desired track. Press
seco-
ndly :
to adjust the playing time.
GOTO
time-:--:--
In MP3/USB/SD mode, press GOTO
first to display :
---/all track
, input the
numbers to play the desired track. Press
second :
to adjust the playing time.
--:--
2
2
