T
RITON
S
YSTEMS
9640-
TO
-9600
C
ONVERSION
P
ROCEDURE
6
7.
Route the dispenser power cable through the cabinet
cable clips.
8.
In the card cage, clip the Ferrite Module onto the
dispenser power cable.
9.
Close the power supply and install the two mounting
screws back into the power supply plate. Reconnect
the power plugs that were removed previously (except
for the 9640 power cable, which is no longer required).
Clip Ferrite Module to mech power cable.
5.
Route the free end of the cable (the end with the
seven-position connector) down through the oval slot
beneath the card cage.
6.
Carefully pull the cable into the security cabinet.
Feed dispenser end of mech power cable
down through oval slot under card cage.
Dispenser end of mech
power cable.
Feed dispenser-end of mech power
cable down through oval slot. Pull cable
into security cabinet.
Route dispenser power cable through
cable clips.
9600 Dispenser Power Cable - Connectors
Backplane end
Dispenser end
Polarizing Pin
Polarizing Pin
