PAGE 4
EXPLANATION OF MODEL CODING
172 REV.010215
R 5 X - XX - XX - X X - X XXXX
BASIC UNIT SERIES
R = Recovery winch
SIZE OF UNIT
REDUCTION RATIO
Only used for non-standard reduction ratios
TYPE OF BRAKE
-12
Automatic brake, counterclockwise drum rotation, intravent
-15
Automatic brake, clockwise drum rotation, intravent
HYDRAULIC MOTOR
-70
High torque, low speed hydraulic motor, 12.9 cubic inch displacement
(Other displacements are optional)
DRUM SIZE
-1
5.0 inch drum diameter X 11
3/8
inch flange diameter X 9 inch between
flanges -
STANDARD
(For other drum sizes refer to APPENDIX A)
OPTIONS
- F
Hydraulically actuated freespooling
- M
Manually actuated freespooling
DESIGN REVISION
SPECIFICATION NUMBER
Describes features not identified by preceding codes
NOTE:
Clockwise and counterclockwise drum rotation is the direction of rotation for pulling or hoisting,
established by looking at the hydraulic motor.
