PAGE 22
RECOMMENDED MAINTENANCE
172 REV.030429
Winch gear train lubricating oil should be changed after the initial six months or 50 hours of operation,
whichever comes first. Lubricating oil should then be changed every 12 months or 500 operating hours,
whichever comes first.
Hydraulic system fluid should be changed at least once every 12 months.
For optimum performance over an extended period of time, the following preventative maintenance service
should be done every 12 months or 500 hours, whichever comes first:
1)
Disconnect all hydraulic hoses and remove the winch from its mounting.
2)
Disassemble the winch as per instructions.
3)
Discard and replace all O-rings and oil seals.
4)
Inspect all parts for wear and replace if necessary.
5)
Clean all parts and inspect for wear and damage as per instructions. Replace worn or
damaged parts as required.
6)
Follow INSTALLATION and OPERATING INSTRUCTIONS when returning winch to its mounting.
When ordering parts for the PULLMASTER Model R5 planetary winch, always quote the complete model
and serial number of the unit.
MODEL NO.
_________________
SERIAL NO.
_________________
PULLMASTER WINCH CORPORATION reserves the right to change specifications and the design of
PULLMASTER planetary winches at any time without prior notice and without incurring any obligations.
