ALF-13080-E-01
All-Flo
17
PILOT VALVE ASSEMBLY
To assemble the pilot valve, reverse the order of disassembly. Should
process fluid have contact with the pilot valve o-rings, they should be
replaced as swelling may occur and cause irregular operation. During
assembly, ensure that the open side of the lip-seals are facing outward.
Lubrication of the pilot sleeve assembly, with a non-synthetic lubricant, is
recommended in order to facilitate re-assembly into the intermediate.
Magna-Lube or Magna-Plate are recommended for assembly lubrication
(see detailed parts list for ordering information).
TORQUE SPECIFICATION CHART
RECOMMENDED TORQUE SPECIFICATIONS
2” Pumps
Wrench Size
Manifold Bolts
37 ft-lbs (50.2 N-m)
3/4”
Chamber Bolts
15 ft-lbs (20.3 N-m)
3/4”
Air Valve Bolts
40 in-lbs (4.5 N-m)
7/16”
Inner Diaphragm Plate Nut
50 ft-lbs (67.8 N-m)
1 1/16”
Intermediate Bolts
11 ft-lbs (14.9 N-m)
1/2”
Outer Diaphragm Plate
Hand tight then 1/8 to 1/4 turn more
