manualshive.com logo in svg

Dover PSG ALL-FLO F200 Series, Установка, эксплуатация и обслуживание

Поделиться
Скачать
Dover PSG ALL-FLO F200 Series Скачать руководство пользователя страница 15

ALF-13080-E-01

All-Flo

15

STEP 7 

Remove the “Air Valve Spool” from 

the main “Air-Valve Assembly”.
Note: The longer piston is to be on 

the plug side.

STEP 8 

Using the pick, remove the “Lip 

Seal (Air Valve)” from the main 

“Air-Valve Assembly”.

STEP 9 

Using the pick, remove the  

second “Lip Seal (Air Valve)” from 

the main “Air-Valve Assembly”.

AIR VALVE ASSEMBLY

To assemble the air valve, reverse the order of disassembly. During  

assembly, ensure that the open side of the lip-seals are both facing 

each other inward. Install the shuttle plate with the smooth/shinny 

side toward the shuttle car. Lubrication of the air valve assembly, with a 

non-synthetic lubricant is recommended. Magna-Lube or Magna-Plate 

are recommended for assembly lubrication (see detailed parts list for 

ordering information). 
Note that if the lip-seals are installed incorrectly, they will be unable to 

rotate. Insert the spool, the spool’s longer piston is to be on the plug side 

and then the air-valve end plug into position.

Содержание PSG ALL-FLO F200 Series


























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды