Dover Imaje S7 Mega, Руководство пользователя

Страница: 58 / 154

56 A19620 C
Use of the Terminal
• Evolution mode
Inactive
: counter does not change.
Input A/Input B : the counter is incremented in response to data from inputs A or B of the
Complete Industrial Interface cassette (only with S7 SUPRA printer).
Object : the counter is incremented in response to data from the object pulse
input.
Message : the counter is incremented when the printer prints a message.
Linked : the counter is incremented in response to the overflow of the previous
one.
• External reset - A or B default. See INPUT/OUTPUT CONNECTIONS section.
None
: without reset to start value with an input
A : reset to start value with RAZCPA input
B : reset to start value with RAZCPB input
A or B : reset to start value with RAZCPA or RAZCPB input
• Activate output -
x
(yes) or
o
(no), it is possible to validate an Industrial Interface Cassette
output (ETAT) which changes state when the counter reaches its end value.
CAUTION The Counting function must not be set to "Tach. puls nb".
See ETAT output, INPUT/OUTPUT CONNECTIONS section.
• Zero before figure -
x
(yes) or
o
(no).
• Reinit/top object -
x
(yes) or
o
(no) - in repeat mode the counter goes back to its start value
every time the "item pulse" signal is received.
• Automatic reset:
x
Reset to start value of the counter as soon as the message is no longer active.
o
The counter keeps the last printed value when the message is no longer active.
The initial value can be reset through the Operator Interface or the Terminal.