Dover Imaje S7 Mega Скачать руководство пользователя страница 124

Страница: 124 / 154

122

A19620 C

Trouble shooting

4.4

When printer is in service

Problems

Actions and remedies

1- Ink level: LOW-50-

1a- Prepare a new ink cartridge.

2- Additive level: LOW-51-

2a- Prepare a new additive cartridge.

3- Ink level: EMPTY-52-

or draining cartridge absent.

3a- Replace the ink cartridge.

4- Additive level: EMPTY-53-

4a- Replace the additive cartridge.

5- Cartridge full -54-

5a- During the draining or flushing phase connect another

depressed cartridge.

6- Temperature fault -90-

6a- The ambient temperature in the room where the printer is

installed is too high and is causing the temperature inside
the module to exceed 70°C. Change the installation.

6b- Call IMAJE Technical Services.

7- Cover fault -84-

7a- Close the head cover or ensure it is properly closed.

7b- Check to ensure the detector magnet is inside the cover.

7c- Call IMAJE Technical Services.

8- EHT Fault -86-87-

8a- Clean and dry the head electrodes carefully.

8b- Ensure that the conditions of the environment (humidity,

temperature) comply with the specifications given in the
technical data sheet for the ink. If they do not comply.

8c- Call IMAJE Technical Services.

9- Recuperation fault -85-

9a- Re-start the jets and check them visually.

If one of the jets is unstable, distorted (outside gutter) or
missing validate the "Unblock nozzle", "Introduce cleaning
solution", "Check jet stability" functions.

9b- If the jets are well inside the gutter but are not being

sucked, check the position of the recuperation tap.

9c- Check the machine parameters and contact IMAJE

Technical Services.

Содержание Imaje S7 Mega



























































































































































Результаты поиска

Содержание Imaje S7 Mega

Отзывы:

Бренды по названию

Популярные бренды

Dover Imaje S7 Mega, Руководство пользователя

Результаты поиска

Содержание Imaje S7 Mega

Отзывы:

Бренды по названию

Популярные бренды