background image

4

01.00

Safety  Instructions

SAFETY  INSTRUCTIONS

Before  putting  the  dispenser  into  ope-
ration,  the  operating  instructions  must
be  read  and  understood.

If  the  user
- cannot  read,  he  must  ask  somebody

to  read  it  out  to  him.

- does  not  know  this  language,  he

must  ask  somebody  to  translate  it
for  him.

The  liquids  delivered  by  the  dis-
penser  are  very  hot!  In  order  to
prevent  scalds,  take  your  hands
and  other  parts  of  the  body  out  of
the  beverage  delivery  area  before
pressing  any  delivery  button.  Stay
away  from  that  area.

Keep  children  off  the  dispenser!

If  the  delivered  beverages  have  a
lower  temperature,  e.  g.  when  too
many  deliveries  have  been  carried
out  in  short  intervals,  observe  the
national  regulations.  (Sterilization
cannot  take  place.  There  is  danger
of  bacteria.)

Regular  cleaning  of  the  dispenser  is
necessary  for  functional  and  hygienic
reasons.
When  cleaning,  be  aware  of  sharp
edges.  There  is  danger  of  injuries!
Switch  the  power  switch  to  "0"  before
pulling  out  the  power  supply  plug.
Before  cleaning  the  dispenser  pull  out
the  power  supply  plug.

Clean  the  dispenser  inside  and  outside
with  a  wet,  neat  cloth;  do  not  spray  it
off.  Use  only  cleaning  agents  approved
by  the  food  industry  for  cleaning  the
dispenser.

The  dispenser  must  be  connected  to
the  drinking  water  system  and  to  the
electric  system  following  local  regula-
tions.
Check  whether  the  power  supply  corre-
sponds  with  the  values  given  on  the
rating  plate.  The  dispenser  must  be
connected  to  an  electric  circuit  which  is
secured  by  an  extra  fuse  (for  fuse  data
see  the  rating  plate).  The  connection
must  be  made  using  a  safety  plug
socket  earthed  according  to  the  regula-
tions.
Follow  local  regulations!

If  the  dispenser  will  not  be  used  for  a
longer  period  of  time  (e.  g.  at  night  or
during  the  weekend),  close  the  water
cock.  Switch  the  power  switch  to  "0".
Do  not  pull  out  the  power  supply  plug
because  otherwise  the  cooling  system
will  not  function  any  more.

The  dispenser  must  not  be  used  when
the  water  supply  is  interrupted  because
otherwise  the  boiler  will  not  be  refilled.

Do  not  switch  off  the  dispenser  bet-
ween  beverage  deliveries  in  order
to  keep  the  optimum  water  temperature
in  the  boiler.

Use  only  original  spare  parts.

Programming  and  repairing  the  dispen-
ser  must  be  performed  by  trained  ser-
vice  technicians  only.

Содержание CAFITESSE 300
























Отзывы: