Douwe Egberts Cafitesse 300 Next Generation, Руководство оператора

Страница: 44 / 48

Fig. 42
USB.release.key
As long as you insert the USB release
key into the USB port, the dispenser
can temporary deliver drinks, even if it
has been switched into locked mode.
(Fig. 42)
Drainage.of.the.drip.tray.
To minimize the need for emptying the
drip tray the service technician can
install a special drainage option to
connect the drip tray directly to a
sewer or drain tank.
Air.pot.Extension.
To allow the use of large pots like air
pots, the service technician can install
a special dispenser foot to increase the
delivery height of the dispenser outlets
to 33 cm (13.4 in.).
Water.cooling.unit.
For the additional delivery of cold
water and cold drinks, the service
technician can equip your dispenser
with a special water cooling unit.
Caution:
Test the quality of the water
supply to ensure delivery of safe
cold drinks according to local
regulations.
Payment.system.
If you would like to enable your
dispenser for vending of drinks, the
service technician can extend your
dispenser with various payment
systems. At your request the service
technician can program specific prices
per drink.
High flow
To increase the delivery speed of
the dispenser the service technician
can install the high flow option. Two
product packs of the same sort of
ingredient have to be inserted.
Pressing one of the left drink buttons
the drink is dispensed from the 2
product packs in the dispenser at the
same time via the left outlet. The right
drink buttons are switched off.
Switch.over
To decrease the replacement intervals
of the product packs the service
technician can install the switch over
option. Two product packs of the same
sort of ingredient have to be inserted
Drinks are only dispensed via the left
outlet. When the left product pack is
empty, drinks are dispensed from the
right product pack. The right drink
buttons are switched off.
44
2011 - 01
l. 9 OPTIONS