Douwe Egberts Cafitesse 300 Next Generation, Руководство оператора

Страница: 19 / 48

Switching.on.the.dispenser
Caution:
Ensure, that the dispenser is
connected to the water supply.
Open the water tap.
Insert the power plug.
The dispenser starts heating up water
and starts cooling down the cooling
compartment. Drink delivery will be
blocked until the water in the boiler has
reached the correct temperature.
A flashing thermometer and the icon
for „Delivery blocked“ will be shown on
the display:
PLEASE.WAIT.
BOILER.IS.
HEATING.UP
Note:
Depending on the dispenser
model (see „Technical
Specifications“) and the ambient
temperature, the heating of the
boiler can take between 30 and
120 minutes. The cooling of the
product compartment can take 24
hours or more.
1.
2.
Note:
If the dispenser has been shut
down for longer periods, the date
and time must be set, so that the
dispenser and the programmed
cleaning cycles are reactivated.
Once the water has reached the preset
temperature, the display shows the
animated symbol illustrated below.The
dispenser is now ready for operation.
Switching.off.the.dispenser
Please take the following preparations
when the dispenser is not to be used
for a long period, e.g. holidays:
Remove the product pack and
check the „Expiry” date.
Store the product packs in a
refrigerator until you switch the
dispenser back on again.
When the expiry date has passed,
throw the product packs away.
Warning:
Do.not.freeze.product.packs.
Clean and flush the dispenser.
Pull the power plug out of the
socket.
Close the water tap.
1.
•
•
2.
3.
4.
2011 - 01
19
4 OPERATING THE DISPENSER l